BSD DevCenter
oreilly.comSafari Books Online.Conferences.


Finding Things in Unix
Pages: 1, 2

Brave enough to try something even more useful but complicated-looking? Let's get find to not only find this file, but move it to the correct directory using the following command:

find . -name "*.pdf" -print | grep -v "^\./pdfs/" | xargs -J X mv X ./pdfs/

To see if it worked, let's repeat the original find command:

find . -name "*.pdf" -print

So it worked. Let's see why. Once grep finished filtering the find output, we piped that result to the xargs command to finish the job for us. The J switch tells xargs to take all of the files it receives and assume that the file you specify with the command is to be the destination. For example, before I ran the find command, I had no idea how many files needed to be moved. There may have been one, or there may have been several. I needed to let xargs know that regardless of how many files were found, I want them all moved and I want them all moved to the pdfs directory. That bit of magic is the job of the J switch. To get the J switch to work properly, I also defined a character (X) and put that character on either side of the mv command.

Learning the Unix Operating System

Related Reading

Learning the Unix Operating System
A Concise Guide for the New User
By Jerry Peek, Grace Todino-Gonguet, John Strang

Remember that Unix filenames don't necessarily have extensions, so you may want to search for a more complicated pattern. Let's say I want to find any files that have "bsd" somewhere in their name. I would do this command:

find . -name "*bsd*" -print

We can also find a file by more than just its name. For example, to find all the files that you have not read in more than (+) 30 days:

find . -atime +30 -print

To see files you haven't modified, use -mtime instead, and to see files you haven't changed the owner or permissions of, use -ctime. The number after the + indicates how many days or 24-hour periods. To see which files were modified today, try:

find . -mtime -1 -print

This will show what files were modified during the last 24 hours. Note that this time you should use the -, as you want to find the files from less than one day ago.

The other switch that deals with time is the -newer switch. The three time switches all use 24-hour periods. If you would like to be a bit more granular in your time than that, the -newer switch will compare a file's access, modification, and change times to within a minute. For example, to see if any of your "dot" files were changed since you last changed your .cshrc file, you could execute this command:

find . -type f -name ".*" -newer .cshrc -print

You'll note that I've included some other new switches in this command. I specified a "type" of -f for files, as I don't want to see any directories, just files. I told the -name switch that I was interested in seeing files that start with a ".". Finally, I used the -newer switch to indicate that I was interested in the files that were modified since I last modified my .cshrc file.

Since I've started to combine switches that indicate which files I'm interested in finding, I should mention that all switches are logically "anded" unless you use the -o or logical "or". Since the switches are logically anded, I really told the find utility that I was only interested in files that were of a certain type and had a certain name and were newer than my .cshrc file.

Let's look at an example that shows the difference between a logical "and" and a logical "or". If I wanted to see all of the files in my home directory that had not been accessed in the last seven days "and" are larger than 10 Mb, I would use this command:

find . -atime +7 -size +20480 -print

However, if I wanted to see any files that either had not been accessed in the last seven days "or" that were over 10 MB in size, I would use this command instead:

find . -atime +7 -o -size +20480 -print

You'll note that I had to do some math to come up with the number to give to the -size expression, since -size is looking for the number of 512-byte blocks. However, I could have used the expr command to do the math for me, like so:

find . -atime +7 -o -size +`expr 10 \* 1024 \* 2` -print

Note that in this example, everything between the backquotes (the ` on the far left of your keyboard) is what will do the required math. We still need the + in front of the first back quote, as we want to see files greater than 10 MB. You could also test what the results of the math will be by adding the echo command to the beginning of the command:

echo find . -atime +7 -o -size +`expr 10 \* 1024 \* 2` -print find . -atime +7 -size +20480 -print

It is a good idea to echo complex commands first, to ensure that the stuff you've quoted will do what you expect before asking the find command to execute it.

That should get you started for this week. In next week's article, I'll continue through the rest of the expressions and give some more practical examples for using the find command.

Dru Lavigne is a network and systems administrator, IT instructor, author and international speaker. She has over a decade of experience administering and teaching Netware, Microsoft, Cisco, Checkpoint, SCO, Solaris, Linux, and BSD systems. A prolific author, she pens the popular FreeBSD Basics column for O'Reilly and is author of BSD Hacks and The Best of FreeBSD Basics.

Read more FreeBSD Basics columns.

Return to the BSD DevCenter.

Sponsored by: